Self-regulating trace heaters
Self-regulating with adaptable output
Various temperature ranges
Demand-orientated out-put grading
High chemical resistance
No temperature limitation required (important at Ex-applications)
Easy to install
Can be cut to length off the roll
Connection by plug-in connectors
The WNH trace heater is used for freeze prevention and temperature maintenance on vessels, pipes, valves, etc. It may be immersed in fluids. For use in aggressive en[1]vironments (e.g. in chemical or petrochemical industry), the trace heater is coated with a special chemically resistant outer jacket (fluoropolymer).
1.Are you factory?
Yes, we are factory, all customers are more than welcome to visit our factory .
2.What are the available product certifications?
We have certifications such as: ATEX, CE, CNEX. IS014001, OHSAS18001,SIRA, DCI. Etc
3.How does self regulating trace heating work?
Self regulating systems work by:
Attaching the heating cable in a straight line underneath the insulation on the pipe.
Applying heating power in relation to the ambient temperature to maintain a holding temperature above freezing.
4.Does self regulating heat trace need a controller?
Although it's called "self-regulating," the cable will not turn itself completely on or off. So, we do recommend that a controller or thermostat of some sort to be used with this type of heating wire.
5.Can heat trace touch itself?
Constant wattage heat trace and MI cable cannot cross or touch itself. ... Self-regulating heat trace cables, however, would adjust to this temperature increase, making them safe to cross or overlap. As with any electrical system, though, there are always potential dangers with using heat trace or heat cables.
