A crucial factor for the efficient operation of flanged and circulation heaters are proper
installation after taking all the necessary precautions.
1. Before starting the installation , ensure:
A. The wattage and capacity of the heater meet the heating requirements.
B. The equipment is not damaged during shipment. If the equipment is damaged,
contact your supplier at once. Do not use damaged equipment.
C. The capacity of the power supply is at least 25% more than the required amperage
of the heater. Adapt according to the ambient operating temperature.
D. The tank in which you are installing the heater is thermally insulated to retain the
heat of the liquid.
2. If the circulation heater requires an inline pump, affix the pump at the inlet end of the heater.
3. If installing horizontally, install the heater with the inlet and outlet facing upwards. This
prevents air pockets from forming inside the tank. Ensure all air is removed from the closed
tank prior to installation.
4. If installing vertically, use the lower pipe for the inlet and the upper pipe for the outlet.
5. Make sure the heater is properly grounded and that the wiring is in accordance with Local
and/or National Electrical Codes.
6. Use a magnetic contactor if the source power is 480V or is three-phased (by a licensed
technician).
Jiangsu Weineng Electric Co.,Ltd is profession manufacturer of various types of industrial electric heater, everything is customized in our factory, could you please kindly share your detailed requirements, then we can check in details and make the design for you.
Contact: Lorena
Email: inter-market@wnheater.com
Mobile: 0086 153 6641 6606 (Wechat/Whatsapp ID)
Post time: Dec-22-2021