The construction of electric heat tracing can also be solved with a single electric heating belt, but there are many points that need to be paid attention to in the process of construction.
First of all, when conducting electric heat tracing construction, the glass fiber pressure-sensitive tape or aluminum tape should be fixed on the pipe at every 50 cm interval. When laying flat, try to place it on the side under the pipe. The angle is controlled at about forty-five degrees. In addition, leave about a centimeter long heating tape at the first power supply point of the line and at the end of the line.
In the process of preparation, it is necessary to pay attention to arranging the electric heating cable according to all the parameters designed in the design drawing. When the parameter is an integer, use the method of flat laying to reduce the contacts. All the heat sinks should be based on the length of the heating belt required by the original requirements of the design drawing. When doing this step, be sure to pay attention to a few details. The length of the heat sink should be in line with the design of the length of the electric heating belt. Although the electric heating belt cannot be subjected to any heavy pressure, it can overlap or cross each other. When winding, try to make the heat sink can be removed for repair or replacement at any time when necessary, and can not damage the electric belt or hinder other circuits. Where two-way or three-way accessories are used, each port of the electric cable should be left with a length of about 40 cm.
This construction method is more careful than the general construction method, and every step must be carefully checked to ensure that there are no problems. How much length should be left in each place or port of the electric heating tape should be thoroughly familiarized first, and it should be checked again after the arrangement.
Jiangsu Weineng Electric Co.,Ltd is profession manufacturer of various types of industrial electric heater, everything is customized in our factory, could you please kindly share your detailed requirements, then we can check in details and make the design for you.
Contact: Lorena
Email: inter-market@wnheater.com
Mobile: 0086 153 6641 6606 (Wechat/Whatsapp ID)
Post time: Mar-25-2022