The temperature of the heated medium rises, and the high temperature medium required by the process is obtained at the outlet of the electric heater. The internal control system of the electric heater automatically adjusts the output power of the electric heater according to the temperature sensor signal of the output port. The medium temperature of the output port is uniform. When the heating element is overheated, the independent thermal protection device of the heating element immediately cuts off the heating power to avoid The over-temperature of the heating material causes coking, deterioration, carbonization, and in severe cases, the heating element burns out, effectively extending the service life of the electric heater.
Heating of chemical materials in the chemical industry, some powder drying under certain pressure, chemical process and spray drying
Hydrocarbon heating, including petroleum crude oil, heavy oil, fuel oil, heat transfer oil, lubricating oil, paraffin, etc.
Process water, steam, molten salt, nitrogen (air) gas, water gas and other fluids that need to be heated
Due to the advanced explosion-proof structure, the equipment can be widely used in explosion-proof places such as chemical industry, military industry, petroleum, natural gas, offshore platforms, ships, and mining areas
1.Are you factory?
Yes, we are factory, all customers are more than welcome to visit our factory .
2.What are the available product certifications?
We have certifications such as: ATEX, CE, CNEX. IS014001, OHSAS18001,SIRA, DCI. Etc
3.What terminal enclosures are available?
Two different types of terminal enclosures are available – a square/rectangular panel
style design suitable for IP54 protection or a round fabricated design suitable for IP65 protection. Enclosures are available in carbon steel or stainless steel construction.
4.How are the wiring connections made?
The selection is based on the customer's cable specifications, and the cables are connected to the terminals or copper bars through explosion-proof cable glands or steel pipes.
5.What other controls are needed for safe operation of the process heater??
The heater needs a safety device to ensure the safe operation of the heater.
Each heater is equipped with an internal temperature sensor, and the output signal must be connected to the control system to realize the over-temperature alarm of the electric heater to ensure the safe operation of the electric heater. For liquid media, the end user must ensure that the heater can only work when it is completely immersed in the fluid. For heating in the tank, the liquid level needs to be controlled to ensure compliance. The outlet temperature measuring device is installed on the user's pipeline to monitor the exit temperature of the medium.