Industrial tank electric heater Vertical type
The heating element can be replaced without emptying the tank. The heating element is a disturbing structure, and the electric heating element is replaced with disturbing bending at all times to maintain explosion protection.
The surface of the heating tube has a power composite bottom, and the medium will not scale, stick, burn, or carbonize on the surface. It is an ideal element for heating viscous and heat-sensitive liquid media.
There are a variety of structures and installation methods for users to choose.
Mainly three-phase structure, which is conducive to grid balance and batch use.
Maximum component length: 10m.
With overheating protection structure, it can be used in explosion-proof occasions.
Stainless steel heater can be used in corrosive occasions and high temperature occasions.
No pollution.
Mainly used in oil fields, refineries, chemical plants, oil depots and various industries in large storage tanks, tankers, tanks, liquid storage, hydraulic pumps in the viscous heat sensitive liquid medium, antifreeze, anti-coagulation, heat preservation of the medium in the gas storage container, Reduce adhesion and drag.
1.Are you factory?
Yes, we are factory, all customers are more than welcome to visit our factory .
2.What are the available product certifications?
We have certifications such as: ATEX, CE, CNEX. IS014001, OHSAS18001,SIRA, DCI. Etc
3.What are the available heater fange type, sizes and materials
WNH industrial electric heater, flange size between 6"(150mm)~50"(1400mm)
Flange standard: ANSI B16.5, ANSI B16.47, DIN, JIS (Also accept customer requirements)
Flange material: Carbon steel, Stainless steel, Nickel-chromium alloy, or other required material
4.What are the available heater pressure ratings?
WNH process flange heaters are available in pressure ratings from 150 psig (10 atm)
to 3000 psig (200 atm).
5.What other controls are needed for safe operation of the process heater?
The heater needs a safety device to ensure the safe operation of the heater.
Each heater is equipped with an internal temperature sensor, and the output signal must be connected to the control system to realize the over-temperature alarm of the electric heater to ensure the safe operation of the electric heater. For liquid media, the end user must ensure that the heater can only work when it is completely immersed in the fluid. For heating in the tank, the liquid level needs to be controlled to ensure compliance. The outlet temperature measuring device is installed on the user's pipeline to monitor the exit temperature of the medium.
