Industrial heater factory
The power can be customized
The medium is heated by electric energy through the energy conversion form of "transfer to + convection", with a thermal efficiency of 99%
The explosion-proof structure can work normally in the explosive gas dangerous places of Zone II
The structure is safe and reliable, and can be designed according to process requirements
Green and environmental protection, in line with national policies
Interlocking control of temperature, pressure, flow, etc. can be realized through the automatic control system
High temperature tracking response progress, fast response, significant energy saving
With electric heating element overheating protection function to prevent the electric heating element from being damaged due to flow interruption and accidents
The internal structure of the heater is designed according to the thermodynamic structure, without heating dead angle
| Material | Stainless steel or as required |
| Flange | DN100 |
| Vessel | Q345R/20II |
| Size | As required |
| Processing Temperature | As required |
| Design Pressure | As required |
| Operation Pressure | As required |
| Heating medium | Various of oil, water, air. etc |
| Resistance Wire | Ni80Cr20 |
Oil heating (lube oil, fuel oil, thermal oil)
Water heating (industrial heating systems)
Natural gas, seal gas, fuel gas heating
Heating of process gases and industrial gases)
Air heating (pressurized air, burner air, drying technology)
Environmental technology (exhaust air cleaning, catalytic after burning)
Steam generator, steam super heater (industrial process technology)
1.Are you factory?
Yes, we are factory, all customers are more than welcome to visit our factory .
2.What are the available product certifications?
We have certifications such as: ATEX, CE, CNEX. IS014001, OHSAS18001,SIRA, DCI. Etc
3.What are the available heater pressure ratings?
WNH process flange heaters are available in pressure ratings from 150 psig (10 atm)
to 3000 psig (200 atm).
4.What other controls are needed for safe operation of the process heater?
The heater needs a safety device to ensure the safe operation of the heater.
Each heater is equipped with an internal temperature sensor, and the output signal must be connected to the control system to realize the over-temperature alarm of the electric heater to ensure the safe operation of the electric heater. For liquid media, the end user must ensure that the heater can only work when it is completely immersed in the fluid. For heating in the tank, the liquid level needs to be controlled to ensure compliance. The outlet temperature measuring device is installed on the user's pipeline to monitor the exit temperature of the medium.
5.What is electrical control panel and its uses?
Similary, an electrical control panel is a metal box which contains important electrical devices that control and monitor a mechanical process electrically. ... An electrical control panel enclosure can have multiple sections. Each section will have an access door.
